Ricoh 3245e Operating Instructions Manual page 525

Note
The first four steps can be done in any order.
A Selecting the receiver
Use the operation panel to set the address of the client that will receive
scanned data.
B Selecting the sending client computer
Use the operation panel to set the address of the client that will deliver
scanned data.
C
Configuring the scanner settings
Use the operation panel to configure the scanner settings.
D Setting originals
Set originals on the exposure glass (platen glass) or in the document feeder
(ADF).
P.31 "Setting Originals on the Exposure Glass (Platen Glass)"
P.32 "Setting Originals in the Document Feeder (ADF)"
E Starting the scan
Start the scan.
Features
1
5