Ricoh 3245e Operating Instructions Manual page 356

Chapter4 Page 104 Thursday, January 27, 2000 1:55 PM
Advanced Transmission Features
C
Enter the "Transfer Request"
function number with the num-
ber keys.
Note
4
If the appropriate display is not
shown, press [ Prev.] or [ Next].
D
Enter a Transfer Stations and
press [Recv. Stn].
Note
Enter the fax numbers of the
Transfer Stations with either
Quick Dials, Speed Dials or the
number keys.
If you make a mistake, press the
{Clear/Stop} key and try again.
To cancel the Transfer Request,
press [Cancel]. The Transmis-
sion Mode menu is shown
again.
E
Enter one or more End Receivers.
104
Note
You cannot enter the numbers
of the End Receivers directly.
The numbers must be stored in
Quick Dials, Speed Dials or
Groups in the Transfer Sta-
tion(s). To specify an End Re-
ceiver, use the special format
described in. P.105 "Specify-
ing an End Receiver"
Press [Add RcvStn] if you wish
enter more End Receivers.
Press the < or > key to see the
End Receivers already entered.
You can select an End Receiver
from this list and cancel it by
pressing the {Clear/Stop} key.
To cancel the Transfer Request,
press [Cancel].
F
When you have specified all the
End Receivers, press [OK].
G
If you want to enter an additional
Transfer Station, press [Yes] and
repeat steps D D D D to F F F F .
If you press [No], the Transmission
Mode menu is shown and a check
mark is added to "Transfer Re-
quest".