Tsi Print; Cil/Tid Print - Ricoh 3245e Operating Instructions Manual

Chapter3 Page 73 Thursday, January 27, 2000 1:55 PM
duce the message to a single A4L
sheet.
your machine
(B4 size)
Note
By default this feature is turned
off. Switch it on with the User Pa-
rameters.
User Parameters"
Reference
P.72 "Page Separation and Length Re-
duction"

TSI Print

Usually the sender's TTI is printed on
received messages. If the sender has
not programmed their TTI, you will
not be able to identify them. Howev-
er, if you turn this feature on, the
sender's RTI or CSI is printed instead
so you can find out where the mes-
sage came from.
P.219 "G3 Analog Line"
Note
You can turn it on or off with the
User Parameters.
ing the User Parameters"
reduction
(A4 size)
ND1X01E3
P.227 "Changing the
P.187 "RTI/TTI"
P.227 "Chang-

CIL/TID Print

The optional ISDN Unit is required.
Two features are provided for identi-
fication of messages received by G4
(ISDN). If turned on, this information
will be printed on every page.
The CIL (Call Identification Line) re-
fers to the combination of the receiv-
er's own fax number, name, the
sender's own fax number and name,
time, and page number. The default
setting is on. The TID refers to the
name registered by the sender in their
TTI. The default setting is off.
Limitation
These features are available only
when receiving in G4 mode.
If the sender's TID contains dou-
ble-byte characters (e.g. Chinese
characters), the TID will not be
printed even if TID Print is turned
on.
Note
You can turn CIL and TID on or off
with the User Parameters.
"Changing the User Parameters"
Printing Functions
3
P.227
73