Note
Confirm that the client computers and the scanner unit are on the same local
network segment. The client computers cannot be connected to the scanner
unit located on a different local network segment.
To use the Network TWAIN Scanner to scan originals, follow these steps.
A
Setting originals
Set originals on the exposure glass (platen glass) or in the document feeder
(ADF).
P.31 "Setting Originals on the Exposure Glass (Platen Glass)"
P.32 "Setting Originals in the Document Feeder (ADF)"
B
Configuring the scanner settings from a network client
Start Type 270 TWAIN Driver Ver.2 from the application using the TWAIN
driver, and then configure the scanner settings.
C
Starting the scan
Type 270 TWAIN Driver Ver.2 starts scanning.
Features
1
3