When Power Is Turned Off Or Fails - Ricoh 3245e Operating Instructions Manual

Chapter6 Page 134 Thursday, January 27, 2000 1:56 PM
Troubleshooting

When Power is Turned off or Fails

Even if the Main Power switch is turned off, the contents of the machine's mem-
ory (programmed numbers etc.) will not be lost. However, if power is lost for
about 1 hour through the Main Power switch being turned off, a power cut or
the power cable being removed, contents in the Fax memory will be lost. Lost
items will include any fax messages stored in memory using Memory Transmis-
sion or Reception.
If a file has been deleted from memory, a Power Failure Report is automatically
printed as soon as power is restored. This report can be used to identify lost files.
If an original stored for Memory Transmission was lost, re-send it. If a message
received by Memory Reception or Substitute Reception was lost, ask the sender
to re-send it. If an Auto Document was lost, you will need to store it in memory
again.
Important
Make sure that 100% is shown on the display before you unplug the machine.
If a lower value is shown, some data is currently stored in memory.
Right after a power failure, the internal battery needs to be sufficiently re-
charged to guard against future data loss. Please keep the machine plugged
6
in and the Main Power switch on for about 24 hours after the power loss oc-
curs.
134