Ricoh 3245e Operating Instructions Manual page 452

Chapter7 Page 200 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools
a sender using G4, register a G4
TID.
You can find the RTI or CSI of a
sender by looking in the destina-
tion name column of the TCR.
Before using the Special RX Nos.
function, switch this function to
On by following the steps shown
in Initial Setup RX.
Setup RX"
Registering Specific Senders (Special
RX Nos.)
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
7
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
200
Reference
For how to use the System User
Tools, see the System Settings
manual.
D
Enter the function number for
"Key Op. Settings" with the num-
ber keys and press the { { { { #} } } } (Enter)
key within 3 seconds.
P.174 "Initial
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the "Special RX Nos." code
with the number keys.
Note
If "Special RX Nos." is not
shown, press [ Prev.] or [ Next].
F
Enter the "Register Sender" code
with the number keys.
G
Choose a number where you want
to program a Specific Sender.
Note
If you make a mistake, press the
{Clear/Stop} key and reenter a