Ricoh 3245e Operating Instructions Manual page 435

Chapter7 Page 183 Thursday, January 27, 2000 1:57 PM
D
Enter the function number for
"Key Op. Settings" with the num-
ber keys and press the { { { { #} } } } (Enter)
key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the number for "Personal
Code" with the number keys.
F
Enter the number for "Reg. Pers.
Code" with the number keys.
G
Enter a Personal Code with the
number keys and press [#
Note
If you enter a wrong number,
press the {Clear/Stop} key and
enter a correct number. If you
enter a wrong value for the 8th
digit, press [Cancel] and enter
the correct number from the
first digit.
If you enter a Personal code that
has already been programmed,
the contents appear on the dis-
play. If you wish to change the
name, press [Name] and enter
another name. If you wish to
program another code, press
[Cancel] and enter the new code.
You can press [Status] to see
which codes have been already
programmed.
H
Press [Name].
I
Enter the name.
# # ]. #
Note
If the name has already been
programmed, it appears on the
display. If you wish to change
the name, press the {Clear/Stop}
key and enter another name.
Reference
P.237 "Entering Text"
J
Press [OK].
The entered Personal Code and
name are shown on the display.
Key Operator Settings
7
183