Ricoh 3245e Operating Instructions Manual page 353

Chapter4 Page 101 Thursday, January 27, 2000 1:55 PM
B
Enter the "Polling RX" function
number with the number keys.
Note
If the appropriate display is not
shown, press [ Prev.] or [ Next].
C
Depending which method you
are using, choose one of the fol-
lowing procedures:
Default ID Polling Reception
A Press the < < or >
< <
the ID Default.
ID Override Polling Reception
A Press the < < or > < <
the ID Override.
B Enter a polling ID (4 charac-
ters) with the number keys and
the letter (A–F).
D
> key to select
> >
E
> key to select > >
F
Polling Reception
Note
If you make a mistake, press
the {Clear/Stop} key and try
again.
0000 and FFFF is not avail-
able.
Press [OK].
The Transmission Mode menu is
shown. A check mark is added to
"Polling RX".
Note
To cancel the Polling Reception,
press [Cancel]. The Transmis-
sion Mode menu is shown.
Press [Exit].
The following display is shown.
Note
"Polling RX" is displayed.
Dial and press the { { { { Start} } } } key.
4
101