Ricoh 3245e Operating Instructions Manual page 415

Chapter7 Page 163 Thursday, January 27, 2000 1:57 PM
digit, press [Cancel] and enter
the correct number.
If a document is already regis-
tered with that Auto Document
number, the name is shown on
the display.
G
Press [Name].
Note
You cannot omit a document
name. Be sure to register it.
H
Enter the Auto Document name.
Note
If the Name is already regis-
tered, it is shown on the display.
If you want to change the docu-
ment name, press the {Clear/
Stop} key and enter another
name.
Reference
P.237 "Entering Text"
I
Press [OK].
Note
If you are storing a standard
size document, go to step L.
Register/Delete Menu
J
When you program the non-stan-
dard paper size press [Size]. If
your document is the standard
size, you can skip step J J J J and K K K K .
K
Select a size using the <
key and press [OK].
The document name and original
size are shown on the display.
L
Set your original and press the
{ { { { Start} } } } key.
The machine starts scanning the
original.
M
When the original has been com-
pletely scanned in, press [Exit].
The Auto Document is stored. The
display shown in step F appears
again.
N
Press the { { { { User Tools/Counter} } } } key.
< or > >
< < > >
7
163