Type 270 Twain Driver Ver.2 Error Messages; Image Data Setting Error Messages; Scanning Operation Error Messages - Ricoh 3245e Operating Instructions Manual

Type 270 TWAIN Driver Ver.2 Error
Messages
This section describes possible causes and actions to take for the error messages
displayed on the computer's screen. Error messages are classified into four
groups: the image data settings, scanning operation, the copier and others.
Note
If an error message that is not described here appears, turn the power off, and
then back on again. If this does not clear the error message, take a note of the
contents and number of the error message and contact your sales or service
representative.
Reference
If a message appears on the machine's operation panel, see P.36 "Copier Error
Messages".

Image Data Setting Error Messages

[Low memory. Please quit another application.] • Memory is low. Quit other currently
[Fail in creating or saving file.]
[Fail in saving preview image]
[Can not find document size. Set the original
size.]
[Frame memory shortage. Can not scan de-
tected size.]

Scanning Operation Error Messages

[Set the original on ADF.]
[Stop Scanning.]

Type 270 TWAIN Driver Ver.2 Error Messages

running applications, and then restart
scanning.
• There is not enough hard disk space
available. Delete unnecessary files.
• There is not enough hard disk space
available. Delete unnecessary files.
• Place the original again.
• Set the original size to be scanned.
• Reset the original size to be scanned.
• Lower the resolution value.
• Load originals in the document feeder
(ADF) properly.
• Scanning has stopped.
5
39