Starting The Machine; Turning On The Power - Ricoh 3245e Operating Instructions Manual

Chapter1 Page 7 Thursday, January 27, 2000 1:53 PM

Starting the Machine

To start the machine, turn on the op-
eration switch.
Note
This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. See "08. Energy Saver
Timer", "09. Auto Off Timer" in
the System Settings manual.
- Power switches -
- -
This machine has two power switch-
es: See P.1 "Guide to Components"
Operation switch
Turn on this switch to activate the
machine. When the machine has
warmed up, you can make copies
or send faxes.
Main power switch
Do not touch the Main Power
switch. It should be used only by a
service representative when the
optional fax unit is installed.
Important
If you leave the Main Power
switch off for more than one hour,
all fax files in memory are lost. See
"Turning Off The Power" below.
Starting the Machine

Turning On The Power

A
Make sure that the power cord is
plugged into the wall outlet firm-
ly and the Main Power switch is
on.
B
Turn on the operation switch. The
On indicator should light.
The panel display will turn on.
Note
If nothing happens when you
turn on the operation switch,
make sure that the Main Power
switch is turned on.
1
7