Ricoh 3245e Operating Instructions Manual page 456

Chapter7 Page 204 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools
J
Press [PrevMenu] 3 times.
K
Press the { { { { User Tools/Counter} } } } key.
Specified Sender List
Print this list to see the currently pro-
grammed Specific Senders.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
7
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, see the System Settings
manual.
D
Enter the function number for
"Key Op. Settings" with the num-
204
ber keys and press the { { { { #} } } } (Enter)
key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the "Special RX Nos." code
with the number keys.
Note
If "Special RX Nos." is not
shown, press [ Prev.] or [ Next].
F
Enter the "Print Sender List" code
with the number keys.
G
Press the { { { { Start} } } } key.
When the printing job is complet-
ed, the display shown in step F ap-
pears again.
Note
If you press [Cancel] before
printing starts, printing stops
and the display shown in step F
appears again.
H
Press [PrevMenu] twice.
I
Press the { { { { User Tools/Counter} } } } key.