Ricoh 3245e Operating Instructions Manual page 472

Chapter7 Page 220 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools
shown on the display or printed in
a report by the receiver's or send-
er's machine. The CSI works even
if the receiver or sender uses a dif-
ferent make machine.
The CSI can contain numerals, a
plus sign (+), and spaces. You usu-
ally should register your country
code, area code (minus the leading
zero) and your fax number in that
order.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
7
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, see the System Settings
manual.
220
D
Enter the number for "Key Op.
Settings" with the number keys
and press the { { { { #} } } } (Enter) key
within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the "G3 Analog Line" code
with the number keys.
Note
If appropriate display is not
shown, press [ Prev.] or [ Next].
To enter the CSI
A Enter the "CSI" code with the
number keys.
B Enter the CSI.
C Press [OK].