Deleting Speed Dials - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 155 Thursday, January 27, 2000 1:57 PM
M
Press [Exit].
N
Press [OK].
The fax number, destination name,
and search letter are registered.
Note
If you press [Cancel], the Speed
Dial is not registered.
O
Press [Exit].
P
Press the { { { { User Tools/Counter} } } } key.
Speed Dial list
Print this list to check which destina-
tions are programmed.
ports/Lists"

Deleting Speed Dials

Use this procedure to delete any
Speed Dials you are not using any-
more.
Limitation
If a registered Speed Dial is being
used for a standby Memory Trans-
mission, the message "
tination is
standby transmission
Please modify/delete
transmission.
you cannot change the destination
for this Speed Dial.
A
B
C
P.170 "Re-
D
This des-
in use for
file.
after
" is shown and
Register/Delete Menu
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
Press the { { { { User Tools/Counter} } } } key.
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
Enter the function number for
"Register/Delete" with the num-
ber keys.
7
155