Selecting Transmission Options For A Single Transmission; Closed Network - Ricoh 3245e Operating Instructions Manual

Chapter4 Page 107 Thursday, January 27, 2000 1:55 PM
reduced to fit onto the paper available
at the other end.
Transmitter
(This machine)
Important
If you turn this feature off, the
scale of the original is maintained
and some parts of the image may
be lost when printed at the other
end.
Note
You can switch this feature on and
off with the User Parameters. The
default setting is on.
"Changing the User Parameters"

- Closed Network

-
- -
If you turn this feature on, transmis-
sion will only take place if the desti-
nation's Polling ID is the same as
yours. This feature can stop you from
accidentally sending information to
the wrong place (you need to co-ordi-
nate Polling IDs with the other party).
Note
You can switch this feature on and
off with the User Parameters. The
default setting is off.
"Changing the User Parameters"
Selecting Transmission
Options for a Single
Transmission
Receiver
A
Set the original and select any
scan settings you require.
Reduction
B
ND1X02E0
Press [Mode].
The Transmission Mode menu ap-
pears.
C
Enter the "Options" function
ND1X02E1
number with the number keys.
P.227
Note
If "Options" is not shown, press
[ Prev.] or [ Next].
D
Press the <
TTI Print on or off.
P.227
Note
The default setting is on.
Transmission Options
< or > < < > key to switch > >
4
107