Ricoh 3245e Operating Instructions Manual page 419

Chapter7 Page 167 Thursday, January 27, 2000 1:57 PM
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Register/Delete" with the num-
ber keys.
E
Enter the "Reg. Irreg. Area" code
with the number keys.
Note
If "Reg. Irreg. Area" is not
shown, press [ Prev.] or [ Next].
F
Press [Area 1] or [Area 2].
Note
If a size is already registered, it
is shown on the display.
Register/Delete Menu
G
Press [Vert.].
H
Select a size you wish to register
using the < < or > > key and press
< < > >
[OK].
The specified size is shown on the
display.
Note
When you select "Auto", "---" is
shown on the display.
I
Press [Horiz.].
J
Enter a length with the number
keys and press [OK].
The specified size is shown on the
display.
7
167