Multi-Copy Reception; 2-Sided Printing - Ricoh 3245e Operating Instructions Manual

Chapter3 Page 69 Thursday, January 27, 2000 1:55 PM

Multi-copy Reception

If you switch this feature on, multiple
copies of each incoming fax message
will be printed. You can also choose
to have multiple copies made of mes-
sages from particular senders.
P.174 "Initial Setup RX", P.199 "Special
Senders to Treat Differently (Special RX
Nos.)"
Limitation
The maximum number of copies
that can be made of each message
is 10. If you are using Multi-copy
with Specified Senders, the maxi-
mum number is 10.
Note
By default this feature is turned
off. Switch it on and set the num-
ber of copies with the Initial Setup
RX settings.
RX"
Note that the machine will use
Memory Reception for Multi-copy
Reception.
ND1X00E7
P.174 "Initial Setup

2-Sided Printing

With this option installed, you can
have a received message printed on
both sides of the paper. By default,
this feature is turned off. Switch it on
with the Initial Setup RX settings and
select lengthwise L copy paper.
P.174 "Initial Setup RX"
Limitation
To use this function all pages of
the received document must be of
the same size—inform the send-
ing party of this beforehand if
necessary. You must also have pa-
per set in your machine of the
same size as that sent by the send-
1
ing party (8 / " 11" 8
2
1 1
8 / " 14" 8 / " 14",
2 2
B4 B4 are typical examples,
whether A3 and B5 sizes are
scanned in correctly will depend
on the fax machine). This machine
will scan in correctly landscape
1
11" 17", 8 / " 14", 8
2
B4, A4, B5 and portrait 8
1 1
5 / " 8 / ", A4, B5 and A5. The
2 2
table below shows the results that
can be achieved when sending
and receiving using this machine.
Printing Functions
3
1
/ " 11",
2
A4 A4,
1
/ " 11", A3,
2
1
/ " 11",
2
69