Ricoh 3245e Operating Instructions Manual page 366

Chapter5 Page 114 Thursday, January 27, 2000 1:56 PM
Communication Information
C
Press the < < or >
< <
file you want to check or edit is
shown. Then press [Check].
Note
If you wish to check only the
transmission status, press [Exit]
to return to standby mode.
5
D
Depending on the setting you
want to check or change, use one
of the following procedures.
Checking Destinations
(Destination List)
A Enter the "Destination List"
number with the number keys.
The total number of destina-
tions and the fax number or
each destination's
shown.
Note
To see hidden destinations,
press [ Prev.] or [ Next].
114
> key until the
> >
name is
Changing the Transmission Time
A Enter the "Change Start Time"
number with the number keys.
B Enter the transmission time (4
digits) with the number keys.
Use 24-hour or 12-hour format
depending on your area. For 12-
hour format, press [AM
switch between AM and PM.
Note
You can not specify a start
time more than 24 hours into
the future.
When changing the time, se-
lect AM or PM before enter-
ing the time.
To start transmission imme-
diately, press [Immediate]. If
memory contains other files
queued for transmission,
those files are sent first.
Re-sending a File
This function is valid when the ma-
chine is set up with the User Pa-
rameters to save messages that
could not be sent in memory.
If you select the failed transmis-
sion file, you can resend it. This
feature allows you to transmit a fax
message again. These files will be
kept for either up to 24 or 72 hours
depending on how you program
PM] to