Sending A Fax Message; Overview - Ricoh 3245e Operating Instructions Manual

Chapter2 Page 25 Thursday, January 27, 2000 1:54 PM

2. Sending a Fax Message

Overview

Overview
The basic procedure to send a fax
message is:
A Make sure that the Facsimile indi-
cator is lit.
B Set your original.
C Dial the number.
Press the {Start} key.
D
The rest of this section describes these
steps and the various features that are
available in more detail.
There are two ways to send a fax mes-
sage:
• Memory Transmission
• Immediate Transmission
Check the indicators on the operation
panel to check which mode is current-
ly active and press the Transmission
Mode key to toggle between them.
25