Transfer Report - Ricoh 3245e Operating Instructions Manual

System settings
Table of Contents

Advertisement

Chapter7 Page 218 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools
Note
If "ECM" is not shown, press
[ Prev.] or [ Next].
F
Switch ECM on or off using the
< or >
<
<
<
>
>
> key and press [OK].
Note
If you press [Cancel], the previ-
ous setting is not changed and
the display shown in step E ap-
pears again.
G
Press [PrevMenu].
H
7
Press the { { { { User Tools/Counter} } } } key.

Transfer Report

For the requesting party to be able to
receive Transfer Result Reports from
the Transfer Station, the requesting
party must store the number of the
telephone line their machine is con-
nected to in their own machine.
P.103 "Transfer Request", P.196 "Mul-
tistep Transfer"
Be sure to insert a pause after the area
code.
For example, if you are in the United
States and your fax number is 212-
1234567, store the following:
• 1212-1234567
218
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, see the System Settings
manual.
D
Enter the function number for
"Key Op. Settings" code with the
number keys and press the { { { { #} } } }
(Enter) key within 3 seconds.

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Aficio 350eAficio 450e

Table of Contents