Using A User Function Key - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 180 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools
D
Enter the function number for
"User Functions" with the num-
ber keys.
Note
If "User Functions" is not
shown, press [ Prev.] or [ Next].
E
Press the User Function key
({ { { { F1} } } } –{ { { { F5} } } } ) you want to use.
Note
If you make a mistake, press
[Cancel] and press the correct
key.
7
You can press [Status] to see
how the User Function keys are
currently programmed.
If you have the optional ISDN
Unit installed, you can not re-
assign User Function key {F4}.
F
Enter the function number you
want to register into the User
Function key with the number
keys and press [OK].
180
Note
If appropriate display is not
shown, press [ Prev.] or [ Next].
If you wish to store more func-
tions, repeat steps E and F for
other keys.
If you press [Cancel], the func-
tion is not stored and the dis-
play shown in step E appears
again.
G
Press the { { { { User Tools/Counter} } } } key.

Using a User Function Key

A
Press the User Function Key
({ { { { F1} } } } –{ { { { F5} } } } ) in which the function
you want to use is stored.
The stored function's display is
shown.
E.g., "Print TCR"