Ricoh 3245e Operating Instructions Manual page 485

Chapter7 Page 233 Thursday, January 27, 2000 1:57 PM
Note
If you press [Cancel], the speci-
fied settings are canceled and
the display shown in step C ap-
pears again.
I
Press [PrevMenu].
J
Press the { { { { User Tools/Counter} } } } key.
Printing the User Parameter List
Print this list to see the current User
Parameter settings.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Key Operator Settings
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Key Op. Settings" with the num-
ber keys and press the { { { { #} } } } (Enter)
key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the "Prt.U.Parameters" code
with the number keys.
Note
If "Prt.U.Parameters" is not
shown, press [ Prev.] or [ Next].
F
Press the { { { { Start} } } } key to print the
list.
Note
If you press [Cancel] before
printing starts, the printing
stops and the display shown in
step C appears again.
G
Press [PrevMenu].
H
Press the { { { { User Tools/Counter} } } } key.
7
233