Setting Originals In The Document Feeder - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 90 Tuesday, January 25, 2000 3:03 PM
Optional Functions
For standard printing functions, set
originals as shown below.
R
2
R
If you have the optional memory
board and the original is set in a dif-
ferent direction from the print paper,
the machine automatically rotates the
original image by 90° to match the
print paper direction.
You cannot set originals of different
sizes at the same time.
When you use thin originals, set one
original at a time in the document
feeder or set them on the exposure
glass (contact glass).
The first 10mm, 0.4", of the leading
edge and the last 2mm, 0.08" of the
trailing edge cannot be printed. Make
sure the leading edge margin is at
least 10mm, 0.4", and the trailing edge
margin is at least 2mm, 0.08".
Do not stack originals above the limit
mark.
Setting Originals in the
Document Feeder
A
Adjust the guide to the original
size.
90
B
Insert the aligned originals face
up into the document feeder.
GRSETT1E
Limitation
Approximately 30 originals
(80g/m
at one time in the document
feeder. The first (top) original
will be fed first.
Note
To avoid a multi-sheet feed,
shuffle the originals before set-
ting them in the document feed-
er.
The guides must fit snugly
against both sides of the stack.
C
Adjust any print settings as nec-
essary, then press the {Start} key.
TPEH350E
2
, 21 lb) can be inserted