2-Sided Transmission (Double-Sided Transmission) - Ricoh 3245e Operating Instructions Manual

System settings
Table of Contents

Advertisement

Chapter4 Page 88 Thursday, January 27, 2000 1:55 PM
Advanced Transmission Features
2-Sided Transmission (Double-Sided
Transmission)
Use this feature to send 2-sided origi-
nals from the Document Feeder
(ADF). Both sides of an original will
be scanned. The front and back of the
scanned original will be printed in or-
der on separate sheets at the other
end. Note that the orientation of alter-
nate sheets may be reversed at the
other end.
4
Limitation
The front and back of a 2-sided
document are scanned in different
directions. This means that when
the front and back sheets of each
page are printed at the other end,
they may be upside-down in rela-
tion to each other.
88
Sending with Image Rotation
Note
If the first page is a single-sided
cover sheet, you can choose to
have this page sent using single-
sided transmission. The remaining
pages will be sent with 2–sided
Transmission feature.
You can confirm whether both
sides were properly scanned in
with the Stamp feature.
"Stamp"
A
Set your original in the Document
Feeder (ADF) and select any scan
settings you require.
B
Press [Mode].
The Transmission Mode menu ap-
pears.
P.55

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Aficio 350eAficio 450e

Table of Contents