Ricoh 3245e Operating Instructions Manual page 108

Copying
B Set the next original.
C After all originals are scanned,
press the {#} key.
The copies are delivered to the
tray.
To stop scanning
2
When you are using the Sort, Stack, or
Staple function, the originals are
scanned into memory.
A
Press the {Clear/Stop} key.
To resume scanning
A Press the [No] key.
Scanning is resumed.
Note
Scanned images in memory
are not cleared.
To clear scanned images of the
originals
A Press the [Yes] key.
Scanning is stopped with the
images cleared.
50
When memory reaches 0%
Scanning will be stopped if the size of
scanned image data exceeds memory
capacity.
Note
There is enough memory to store
approximate 100
A4 size. The number of originals
that can be stored in memory var-
ies depending on the memory set-
ting and types of the original.
Reference
Scanning will stop when memory
reaches 0% during sorted copying.
However, you can change this set-
ting so that all the scanned pages
are copied and delivered to the
tray first, then the machine auto-
matically continues scanning the
remaining
Mem.full-AutoStrt" in
Input/Output
A
Press the {Start} key.
ND2C0103
The scanned pages are delivered to
the tray. Then, the image data in
memory is cleared.
B
Remove the copies and continue
copying by following the instruc-
tions on the display.
ND2C0104
400 originals of
originals. See "8.
P.155 "3.
2
/ ".
2