Deleting Quick Dials - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 139 Thursday, January 27, 2000 1:57 PM
C Press the < < or > < <
the feature on or off.
D Press [OK].
E Enter the "TTI Print" function
number with the number keys.
F Press the < < < < or >
which TTI is printed on mes-
sages sent to this destination.
G Press [OK].
H Press [Exit].
K
Press [OK] to register the new set-
ting.
Note
If you press [Cancel], the entered
values are canceled and the dis-
play shown in step G appears
again.
> key to turn > > L
M
Quick Dial List
Printing the Quick Dial list allows
you to check destinations registered
in Quick Dial keys.
Lists"

Deleting Quick Dials

> > key to select >
This procedure describes how to find
a programmed Quick Dial and delete
it.
A
Register/Delete Menu
Press [Exit].
The display shown in step F ap-
pears again.
Press the { { { { User Tools/Counter} } } } key.
P.170 "Reports/
Limitation
When a Quick Dial key is being
used for a standby Memory Trans-
mission, the message "This desti-
nation is in use for standby
transmission file. Please modify/
delete after transmission."
shown and you cannot delete the
destination for this key.
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
7
is
139