Adjust Image - Ricoh 3245e Operating Instructions Manual

Menu
Reg. User Code
Chg/Del User Code
Counter List Print

2. Adjust Image

Menu
1. Erase Border
2. Erase Center
Description
You can register user codes.
Note
Up to 50 user codes (8 digits or less) can be registered.
You can change or delete user codes.
Note
The number of copies made under the old code is added
to that made under the new user code.
The number of copies made under the deleted code is
also deleted.
You can print a list of counters shown by user code.
Note
To stop the printing, press the [Cancel] key.
1
/
2
Description
The default setting of the width of the erased margins in the
Erase Border mode can be changed as follows:
• Metric version: 3 – 50mm in 1mm steps
• Inch version: 0.1 – 2.0" in 0.1" steps
Note
Default:
• Metric version: 10mm
• Inch version: 0.4"
The default setting of the width of the erased margins in the
Erase Center mode can be changed as follows:
• Metric version: 3 – 50mm in 1mm steps
• Inch version: 0.1 – 2.0" in 0.1" steps
Note
Default:
• Metric version: 10mm
• Inch version: 0.4"
Settings you can Change with the User Tools
4
149