Verifying VLAN Rule Configuration
Verifying VLAN Rule Configuration
To display information about VLAN rules configured on the switch, use the following show command;
show vlan rules
For more information about the resulting display from this command, see the OmniSwitch CLI Reference
Guide. An example of the output for the show vlan rules command is also given in
Configuration" on page
page 8-22
Displays a list of rules for one or all VLANs configured on the switch.
8-3.
OmniSwitch AOS Release 6 Network Configuration Guide
Defining VLAN Rules
"Sample VLAN Rule
September 2009