Setting Up Authentication Clients
4
From this window you may install the client at the default destination folder shown on the screen or
you may click the Browse button to select a different directory. Click on the Next button. The software
loads, and the following window displays.
5
This window gives you the option of restarting your PC workstation now, or later. You cannot use the
AV-Client until you restart your computer. If you decide to restart now, be sure to remove any disks from
their drives. Click the Finish button to end the installation procedure.
page 36-16
OmniSwitch AOS Release 6 Network Configuration Guide
Configuring Authenticated VLANs
September 2009