Port Assignment Specifications; Port Assignment Defaults - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Port Assignment Specifications

Port Assignment Specifications
Note that the maximum limit values provided in the following Specifications table are subject to available
system resources:
IEEE Standards Supported
Platforms Supported
Maximum VLANs per switch
Maximum VLAN port associations (VPA)
per switch
Maximum 802.1Q VLAN port associations
per switch
Switch ports eligible for port mobility.
Switch ports eligible for dynamic VLAN
assignment.
Switch ports eligible for static VLAN
assignment.

Port Assignment Defaults

Parameter Description
Configured default VLAN
Port mobility
Bridge mobile port traffic that
doesn't match any VLAN rules on
the configured default VLAN
Drop mobile port dynamic VLAN
assignments when learned mobile
port traffic that triggered the assign-
ment ages out
Enable Layer 2 authentication on the
mobile port
Enable 802.1x port-based access
control on a mobile port
page 6-2
802.1Q–Virtual Bridged Local Area Networks
802.1D–Media Access Control Bridges
OmniSwitch 6400, 6800, 6850, 6855, and 9000
4094 (based on switch configuration and available
resources).
32768
2500 (OmniSwitch 6400)
Untagged Ethernet and gigabit Ethernet ports that are
not members of a link aggregate.
Mobile ports.
Non-mobile (fixed) ports.
Mobile ports.
Uplink ports.
10 gigabit ports.
Link aggregate of ports.
Command
vlan port default
vlan port mobile
vlan port default vlan
vlan port default vlan restore
vlan port authenticate
vlan port 802.1x
OmniSwitch AOS Release 6 Network Configuration Guide
Assigning Ports to VLANs
Default
All ports initially associated
with default VLAN 1.
Disabled
Disabled
Enabled
Disabled
Disabled
September 2009