Verifying The Link Oam Configuration - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Verifying the LINK OAM Configuration

Verifying the LINK OAM Configuration
To display information about LINK OAM on the switch, use the show commands listed below:
show efm-oam configuration
show efm-oam port
show efm-oam port detail
show efm-oam port statistics
show efm-oam port remote detail
show efm-oam port history
show efm-oam port l1-ping detail
page 16-12
Displays the global LINK OAM configuration.
Displays the status of LINK OAM on all the ports in the system,
along with other relevant information such as OAM mode, opera-
tional status and loopback status of the port.
Displays the LINK OAM configuration and other related parameters
for a port.
Displays the LINK OAM statistics on a port, or a range of ports or
on all ports.
Displays the LINK OAM configuration and details of the related
parameters of the remote port.
Displays the log of events that have occurred on a port. Use this
command to display specific event logs on a port.
Displays the frames lost during a loopback session.
OmniSwitch AOS Release 6 Network Configuration Guide
Configuring EFM (LINK OAM)
September 2009