Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual page 434

802.1Q Overview
The port can only be assigned to one untagged VLAN (in every case, this will be the default VLAN). In
the example above the default VLAN is VLAN 1. The port can be assigned to as many 802.1Q VLANs as
necessary, up to 4093 per port or 32768 VLAN port associations.
For the purposes of Quality of Service (QoS), 802.1Q ports are always considered to be trusted ports. For
more information on QoS and trusted ports, see
Alcatel-Lucent's 802.1Q tagging is done at wire speed, providing high-performance throughput of tagged
frames.The procedures below use CLI commands that are thoroughly described in "802.1Q Commands" of
the OmniSwitch CLI Reference Guide.
page 21-4
Chapter 40, "Configuring QoS."
OmniSwitch AOS Release 6 Network Configuration Guide
Configuring 802.1Q
September 2009