Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual page 501

Configuring IP
Up to 200 ARP filters can be defined on a single switch. To remove an individual filter, use the no form of
the arp filter command. For example:
-> no arp filter 198.0.0.0
To clear all ARP filters from the switch configuration, use the
-> clear arp filter
Use the show arp summary
this and other ARP filter commands, see the OmniSwitch CLI Reference Guide.
OmniSwitch AOS Release 6 Network Configuration Guide
command to verify the ARP filter configuration. For more information about
September 2009
clear arp filter command. For example:
IP Forwarding
page 24-15