Managing Authentication Servers
Removing an LDAP Authentication Server
To delete an LDAP server from the switch configuration, use the no form of the command with the rele-
vant server name.
-> no aaa ldap-server topanga5
The topanga5 server is removed from the configuration.
Verifying the Authentication Server Configuration
To display information about authentication servers, use the following command:
aaa hic allowed-name
An example of the output for this command is given in
Servers" on page
35-4. For more information about the output of this command, see the OmniSwitch CLI
Reference Guide.
OmniSwitch AOS Release 6 Network Configuration Guide
Displays information about a particular AAA server or AAA servers.
"Quick Steps For Configuring Authentication
September 2009
Verifying the Authentication Server Configuration
page 35-29