Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual page 183

Defining VLAN Rules
Server 1
10.15.14.16
Router 1
No DHCP
Relay
Router 2
DHCP
Relay On
Server 2
10.13.15.17
Servers
DHCP
Both servers become members in their
DHCP
respective s via IP subnet rules.
VLAN
s
Router
Router 1 provides connectivity between the Test
and the Production
VLAN
have Bootup functionality enabled so it cannot
connect servers and clients from different
DHCP
s.
VLAN
Router 2 connects the Production
Branch . With DHCP Relay enabled, this
VLAN
router can provide connectivity between the
server in the Branch
DHCP
clients in the Production
OmniSwitch AOS Release 6 Network Configuration Guide
Subnet 10.15.X.X
IP
DHCP Port Rules
Production VLAN
Subnet 10.15.128.X
IP
DHCP Port Rules
IP
DHCP Port/MAC Rules
. It does not
VLAN
and the
VLAN
and the
VLAN DHCP
.
VLAN
DHCP Port and MAC Rule Application Example
Test VLAN
Branch VLAN
Subnet 10.13.X.X
DHCP
Clients 1 to 6 are assigned to their respective
s through
VLAN
4 are not in a
must rely on the server in the Branch
initial addressing information. Clients 7 and 8
share a port with other devices, so they are
assigned to the Branch
address rules.
September 2009
Application Example: DHCP Rules
OmniSwitch
DHCP Port
DHCP Port
Clients
port rules. Clients 3 and
DHCP
with a server so they
VLAN DHCP
VLAN
via
VLAN DHCP MAC
Client 1
Rule
Client 2
Rule
Client 3
DHCP
Port Rule
Client 4
DHCP
Port Rule
Client 5
DHCP
Port Rule
Client 6
DHCP
Port Rule
Client 7
DHCP
MAC
Client 8
DHCP
MAC
for
page 8-21