Enable/Disable 802.1X Port-Based Access Control - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Understanding Mobile Port Properties

Enable/Disable 802.1X Port-Based Access Control

To enable or disable 802.1X on a mobile port, enter vlan port followed by the port's slot/port designa-
tion then 802.1x followed by enable or disable. For example,
-> vlan port 3/1 802.1x enable
-> vlan port 5/2 802.1x disable
To enable or disable 802.1X on multiple ports, specify a range of ports and/or multiple slots.
-> vlan port 6/1-32 8/10-24 9/3-14 802.1x enable
-> vlan port 5/3-6 9/1-4 802.1x disable
Only mobile ports are eligible for 802.1X port-based access control. If enabled, the mobile port partici-
pates in the authentication and authorization process defined in the IEEE 802.1X standard and supported
by Alcatel-Lucent switches. For more information, see
page 6-18
Chapter 37, "Configuring 802.1X."
OmniSwitch AOS Release 6 Network Configuration Guide
Assigning Ports to VLANs
September 2009