Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual page 732

Quick Steps for Configuring Access Guardian
Captive Portal:
authentication:
pass: default-vlan (default)
fail: block (default)
Device classification policies on 802.1x port 2/48
Supplicant:
authentication:
pass: vlan 500, block
fail: block (default)
Non-Supplicant:
block (default)
Captive Portal:
authentication:
pass: default-vlan (default)
fail: block (default)
To verify the Captive Portal configuration for an 802.1X-enabled port, use the
-> show 802.1x 1/13
802.1x configuration for slot 1 port 13:
direction
operational directions
port-control
quiet-period (seconds)
tx-period (seconds)
supp-timeout (seconds)
server-timeout (seconds)
max-req
re-authperiod (seconds)
reauthentication
Supplicant polling retry count
Captive Portal Session Limit (hrs)
Captive Portal Login Retry Count
To verify the global Captive Portal configuration for the switch, use the
command:
-> show 802.1x captive-portal configuration
802.1x Captive Portal configuration for slot 7 port 11:
Session Limit (hours)
Login Retry Count
802.1x Captive Portal configuration for slot 8 port 1:
Session Limit (hours)
Login Retry Count
page 34-6
= both,
= both,
= auto,
= 60,
= 30,
= 30,
= 30,
= 2,
= 3600,
= no
= 2
= 12
= 3
= 4,
= 5,
= 8,
= 2,
OmniSwitch AOS Release 6 Network Configuration Guide
Configuring Access Guardian
show 802.1x command:
show 802.1x auth-server-down
September 2009