Mip Ccm Database Support - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Ethernet OAM Overview

MIP CCM Database Support

Per section 19.4 of the IEEE 802.1ag 5.2 draft standard, an MHF may optionally maintain a MIP CCM
database as it is not required for conformance to this standard. A MIP CCM database, if present, main-
tains the information received from the MEPs in the MD and can be used by the Linktrace Protocol.
This implementation of Ethernet OAM does not support the optional MIP CCM database. As per section
19.4.4 of the IEEE 802.1ag 5.2 draft standard, LTM is forwarded on the basis of the source learning filter-
ing database. Because the MIP CCM database is not supported in this release, MIPs will not forward LTM
on blocked egress ports.
page 15-6 OmniSwitch AOS Release 6 Network Configuration Guide
Configuring Ethernet OAM
September 2009