Show 802.1Q Information - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Configuring 802.1Q

Show 802.1Q Information

After configuring a port or link aggregation group to be a tagged port, you can view the settings by using
the show 802.1q command, as demonstrated:
-> show 802.1q 3/4
Acceptable Frame Type
Force Tag Internal
Tagged VLANS
-------------+-------------------------------------------------+
2
-> show 802.1q 2
Tagged VLANS
-------------+-------------------------------------------------+
3
To display all VLANs, enter the following command:
-> show vlan port
OmniSwitch AOS Release 6 Network Configuration Guide
: Any Frame Type
:
Internal Description
TAG PORT 3/4 VLAN 2
Internal Description
TAG AGGREGATE 2 VLAN 3
NA
September 2009
Configuring an 802.1Q VLAN
page 21-7