Verifying The User Configuration - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Managing Switch User Accounts

Verifying the User Configuration

To display information about user accounts configured locally in the user database, use the show
commands listed here:
show user
show user password-policy
show user password-policy
show user password-policy
show user lockout-setting
show aaa priv hexa
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show user command is also given in
Network Administrator User Accounts" on page
OmniSwitch AOS Release 7 Switch Management Guide
Displays information about all users or a particular user configured in
the local user database on the switch.
Displays the minimum number of characters that are required for a user
password.
Displays the expiration date for passwords configured for user accounts
stored on the switch.
Displays the global password settings configured for the switch.
Displays the global user lockout settings configured for the switch.
Displays hexadecimal values for command domains/families.
6-6.
March 2011
Verifying the User Configuration
"Quick Steps for
page 6-21