Source Learning Specifications; Source Learning Defaults - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Source Learning Specifications

Source Learning Specifications
The functionality described in this chapter is supported on the OmniSwitch 6400, 6800, 6850, 6855, and
9000 switches unless otherwise stated in the following Specifications table or specifically noted within any
section of this chapter.
RFCs supported
IEEE Standards supported
Maximum number of learned MAC addresses when
synchronized MAC source learning mode is enabled
Maximum number of learned MAC addresses per
OmniSwitch 9000 when distributed MAC source
learning mode is enabled.
Maximum number of static L2 multicast MAC
addresses

Source Learning Defaults

Parameter Description
Static MAC address management status
Static MAC address operating mode
MAC address aging timer
MAC source learning mode
page 2-2
2674—Definitions of Managed Objects for Bridges
802.1Q—Virtual Bridged Local Area Networks
802.1D—Media Access Control Bridges
OmniSwitch 9000 = 16K/chassis
OmniSwitch 6400, 6800, and 6850 = 16K/stack
OmniSwitch 6855 = 16K/standalone switch
16K per module; up to 64K per chassis.
Note: Distributed MAC source learning mode is not
supported on OmniSwitch 6400, 6800, 6850, and
6855 switches.
OmniSwitch 9000 = 1024/chassis
OmniSwitch 6400 = 256/stack
OmniSwitch 6850 = 1024/stack
OmniSwitch 6855 = 1024/standalone switch
Command
mac-address-table
mac-address-table
mac-address-table aging-time
source-learning chassis-distributed
OmniSwitch AOS Release 6 Network Configuration Guide
Managing Source Learning
with Traffic Classes, Multicast Filtering and
Virtual LAN Extensions
Default
permanent
bridging
300 seconds
synchronized
September 2009