Verifying The Vpls Configuration - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Verifying the VPLS Configuration

Verifying the VPLS Configuration
You can use CLI show commands to display the current configuration and statistics of VPLS service enti-
ties on a switch. These commands include the following:
show service port
show service l2profile
show service customer
show service sdp
show service id all
show service sap-using
show service sdp-using
show service egress-label
show service ingress-label
show service fdb-info
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide.
page 11-32
Displays the access port configuration.
Displays the Layer 2 profiles configured for the switch.
Displays the customer account configuration.
Displays the SDP configuration for the switch.
Displays detailed configuration information about the specified ser-
vice ID, including the SDP and SAP configuration associated with
the service.
Displays the Service Access Point (SAP) usage for the switch.
Displays the Service Distribution Point (SDP) usage for the switch.
Displays the services that are using a specific egress label or a range
of egress labels.
Displays the services that are using a specific ingress label or a range
of ingress labels.
Displays forwarding database (FDB) information for the router.
OmniSwitch AOS Release 6 Network Configuration Guide
Configuring VPLS
September 2009