Vrf Specifications; Vrf Defaults - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

VRF Specifications

VRF Specifications
The multiple VRF functionality described in this chapter is supported on the OmniSwitch 6855-U24X and
9000E series switches. Note that any maximum limits provided in the Specifications table are subject to
available system resources.
Routing Protocols Supported
Maximum VRF instances per switch
Maximum VRF instances per VLAN
Maximum OSPFv2 VRF
routing instances per switch
Maximum RIPv2 VRF
routing instances per switch
Maximum BGP VRF routing instances per
switch
SNMP version required for management

VRF Defaults

Parameter Description
Active VRF instance
page 25-2
Static, IPv4, RIPv2, OSPFv2,BGP4
8 (OmniSwitch 6855-U24X)
64 (OmniSwitch 9000E)
1
8 (OmniSwitch 6855-U24X)
16 (OmniSwitch 9000E)
8 (OmniSwitch 6855-U24X)
16 (OmniSwitch 9000E)
8 (OmniSwitch 6855-U24X)
32 (OmniSwitch 9000E)
SNMPv3
Command
vrf
OmniSwitch AOS Release 6 Network Configuration Guide
Configuring Multiple VRF
Default Value/Comments
Default VRF instance
September 2009