Displaying Learned Port Security Information
Displaying Learned Port Security Information
To display LPS port and table information, use the show commands listed below:
port-security learn-trap-threshold
show port-security shutdown
For more information about the resulting display from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show port-security and show port-security shutdown
commands is also given in
page 3-12
Displays Learned Port Security (LPS) configuration and table
entries.
Displays the amount of time during which source learning can
occur on all LPS ports.
"Sample Learned Port Security Configuration" on page
OmniSwitch AOS Release 6 Network Configuration Guide
Configuring Learned Port Security
3-3.
September 2009