Xerox B310 Service Manual page 99

Action
Step 7
Make sure that the JFUSER1 and
JEXIT1 cables are properly
connected on the controller board.
Does the problem remain?
Step 8
Make sure that the high voltage
cable is properly connected to the
LVPS.
Does the problem remain?
Step 9
Perform a POR.
Does the problem remain?
Step 10
Replace the LVPS. See LVPS
removal.
Does the problem remain?
Step 11
Replace the fuser. See Fuser
removal.
Does the problem remain?
1 1 2 2 6 6 E E r r r r o o r r s s
1 1 2 2 6 6 E E r r r r o o r r M M e e s s s s a a g g e e s s
Error code
126.01
126.02
126.05
126.06
126.07
126.10
Yes
Go to step 8.
Go to step 9.
Go to step 10.
Go to step 11.
Contact the next level of support.
Description
Line frequency has gone outside
the operating range.
No line frequency was detected.
The LVPS power dropped but the
printer was not in sleep mode.
LVPS 25 V line error was detected.
LVPS 5 V rail was down during
power-on.
No line frequency was detected.
Diagnostics and Troubleshooting
No
The problem is solved.
The problem is solved.
The problem is solved.
The problem is solved.
The problem is solved.
Action
See LVPS service check.
Xerox B310 Printer
®
Service Manual
99