Xerox B310 Service Manual page 104

Diagnostics and Troubleshooting
6 6 y y y y E E r r r r o o r r s s
6 6 0 0 0 0 – – 6 6 8 8 0 0 E E r r r r o o r r M M e e s s s s a a g g e e s s
Error code
600.01
600.02
600.04
600.05
600.06
600.07
600.09
600.10
600.11
600.95
602.29
611.02
611.32
611.33
611.34
611.35
611.36
611.37
104 Xerox B310 Printer
®
Service Manual
Description
Toner tally from the RIP was not
received.
Video did not start.
Duplex page was not picked.
Invalid PH NVRAM Type error was
detected.
Paper port driver is unresponsive.
Page is at image point before EP is
ready.
EP update error was detected.
EP late run-in error was detected.
Packing material was detected by
the sensor (toner density).
RIP intentionally declared a jam
error, usually to prevent a kiosk
user from printing free pages.
Tray 2 was not ready for picking.
An Input ISR error occurred and
the printhead was not ready.
Lost Hsync errors were detected.
Laser safety interlock system may
be the cause.
Lost Hsync errors were detected
during servo.
A mirror motor lock error was
detected.
Mirror motor never got first lock.
Mirror motor lock never stabilized.
Paper reached the sensor (input)
but the mirror motor was not
locked.
Action
Resend the print job. If the
problem remains, then contact the
next level of support.
Remove the imaging unit and
toner cartridge, and then make
sure that all packing material are
properly removed.
Resend the print job. If the
problem remains, then contact the
next level of support.
See Optional tray pick drive failure
service check .
See Printhead service check.