Xerox B310 Service Manual page 126

Service Menus
P P r r i i n n t t e e r r D D i i a a g g n n o o s s t t i i c c s s & & A A d d j j u u s s t t m m e e n n t t s s
S S e e n n s s o o r r T T e e s s t t s s
1. Enter the Diagnostics menu, and then select Printer diagnostics & adjustments.
A list of sensor tests appears.
2. Find, and then manually toggle the sensor.
Note:
• The sensor status on the screen toggles between 1 and 0 when the sensor is properly working.
• If a sensor test fails, the test failure may not indicate a failed sensor. Further troubleshooting
may be required. Check the boards and cables for possible issues.
• For the fuser exit sensor actuator, toggle it toward the rear door.
List Of Sensor Tests
MPF media present
Tray1 present
Input
Output bin/Narrow media
Fuser exit
Front door interlock
M M o o t t o o r r T T e e s s t t s s
1. Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Motor tests
For non-touch-screen printer models, press
2. Select a motor.
Note:
• If the motor is activated, then it is properly working.
• Some motors require automatic deactivation to avoid secondary issues such as possible damage
and contamination.
• Some tests require a special action to activate a motor such as removing a major component.
• If the motor fails, the test failure may not indicate a failed motor. Further troubleshooting may be
required. Check the boards and cables for possible issues.
• To stop a running motor in non-touch-screen printer models , press
126 Xerox B310 Printer
®
Service Manual
to navigate through the settings.
.