Xerox B310 Service Manual page 75

Action
Step 3
1 Make sure that the tray is not
overfilled.
2 Make sure that the paper
guides are not set too tight
against the paper.
Does the problem remain?
Step 4
Check the tray for crumpled,
damaged, or deformed paper.
Are there crumpled, damaged, or
deformed paper in the tray?
Step 5
Replace the crumpled, damaged,
or deformed paper.
Does the problem remain?
Step 6
Identify the source tray.
Is MPF the source tray?
Step 7
Make sure that the MPF pick roller
is free of contamination.
Does the problem remain?
Step 8
Replace the front door. See
door removal.
Does the problem remain?
Step 9
Make sure that the pick roller is
free of contamination.
Does the problem remain?
Step 10
1 Replace the pick roller.
2 Replace the separator roller.
Does the problem remain?
Step 11
1 Enter the Diagnostics menu,
and then navigate to:
Yes
Go to step 4.
Go to step 5.
Go to step 6.
Go to step 7.
Go to step 8.
Go to step 9.
Front
Go to step 10.
Go to step 11.
Go to step 13.
Diagnostics and Troubleshooting
No
The problem is solved.
Go to step 6.
The problem is solved.
Go to step 9.
The problem is solved.
The problem is solved.
The problem is solved.
The problem is solved.
Go to step 12.
Xerox B310 Printer
®
Service Manual
75