Xerox B310 Service Manual page 77

Action
Does the sensor status change
while toggling the sensor?
Step 4
1 Remove the right cover. See
Right cover removal.
2 Make sure that the JMTR1
sensor cable is properly
connected to the controller
board.
Does the problem remain?
Step 5
Perform a print test.
Does the problem remain?
2 2 0 0 2 2 P P a a p p e e r r J J a a m m s s
2 2 0 0 2 2 P P a a p p e e r r J J a a m m M M e e s s s s a a g g e e s s
Error code
202.03
202.13
202.23
202.x4
202.05
202.15
202.25
202.91
202.93
Yes
Go to step 5.
Contact the next level of support.
Description
Paper fed from the MPF never
arrived at the sensor (fuser exit).
Paper fed from tray 1 never arrived
at the sensor (fuser exit).
Paper fed from tray 2 never arrived
at the sensor (fuser exit).
Paper cleared the sensor (fuser
exit) too soon.
Paper fed from the MPF never
cleared the sensor (fuser exit).
Paper fed from tray 1 never
cleared the sensor (fuser exit).
Paper fed from tray 2 never
cleared the sensor (fuser exit).
Paper remains detected at the
sensor (fuser exit) after the printer
is turned on.
The sensor (fuser exit) detected a
jam during or after a flush action.
Diagnostics and Troubleshooting
No
The problem is solved.
The problem is solved.
Action
See Sensor (fuser exit): Paper
failed to arrive jam service check
See Sensor (fuser exit): Paper
cleared too early jam service check
.
See Sensor (fuser exit): Paper
failed to clear jam service check
See Sensor (fuser exit): Static jam
service check .
Xerox B310 Printer
®
Service Manual
.
.
77