Xerox B310 Service Manual page 47

Action
Step 10
1 Remove the right cover. See
Right cover removal.
2 Make sure that the HVPS1
cable on the controller board
and HVPS is properly
connected.
Does the problem remain?
Step 11
Replace the HVPS. See HVPS
removal.
Does the problem remain?
P P a a p p e e r r C C u u r r l l C C h h e e c c k k
Note: Before performing this print quality check, print the Print Quality Test Pages. From the
control panel, navigate to Settings > Troubleshooting > Print Quality Test Pages, and then
perform the initial print quality check. See
Action
Step 1
Check if the printer is using a
genuine and supported Xerox
toner cartridge.
If the printer is using a third-party
cartridge, then refer the users to
their cartridge supplier.
Is the printer using a genuine and
supported Xerox toner cartridge?
Step 2
Insert a genuine and supported
Xerox toner cartridge.
Does the problem remain?
Step 3
Yes
Go to step 11.
Contact the next level of support.
Performing the initial troubleshooting check
Yes
Go to step 3.
Go to step 3.
Go to step 5.
Diagnostics and Troubleshooting
No
The problem is solved.
The problem is solved.
No
Go to step 2.
The problem is solved.
Go to step 4.
Xerox B310 Printer
®
Service Manual
.
47